ループタック粘着力測定

精密接着強度試験

ASTM D6195

会社概要

ASTM D6195 in Adhesive Test Methods

ASTM D6195 is a standardized method used to evaluate the tack strength of pressure-sensitive adhesives through controlled ループタックテスト procedures. It provides a quantitative measure of how strongly an adhesive bonds to a stainless steel surface under very light contact pressure.

In modern adhesive test methods, ASTM D6195 plays a critical role in quality control, product development, and comparative evaluation of adhesive formulations used in tapes, labels, and industrial bonding systems.

The method is widely adopted because it simulates a real-world “instant stick” condition, where adhesives must form a bond immediately upon contact

ASTM D6195
Relevant Instruments

Test Principle of ASTM D6195

The ASTM D6195 method is based on a simple but highly sensitive principle:

A strip of adhesive material is formed into a loop and brought into contact with a standardized stainless steel surface. The only applied force is the weight of the loop itself. Once contact is made, the loop is immediately withdrawn, and the force required to detach it is recorded.

This measured peak force represents the adhesive’s tack strength.

Key influencing factors include:

  • Adhesive formulation and viscosity
  • Backing stiffness and thickness
  • Contact area consistency
  • Surface cleanliness of substrate
  • Contact time (kept extremely short in testing)

Because of its sensitivity, ループタックテスト is widely used in both research and industrial quality control environments.

01

ASTM D6195

感圧接着剤のループタック強さの標準試験方法。この方法は、標準化された表面から接着剤ループを分離するのに必要な最大力の測定方法を定義しています。

02

PSTC16

感圧テープ協議会による標準試験方法で、テープおよびラベル産業で広く使用されている。

03

FLANT9

特に包装材料のループタック評価によく使われる業界標準。

Test Methods in ASTM D6195

ASTM D6195 defines two main approaches:

01

Test Method A – Tensile Tester Method

This method uses a tensile testing system and requires a 7-inch specimen strip. It is suitable for laboratories already equipped with universal tensile testing systems.

It measures:

  • Peak detachment force
  • Adhesion failure behavior
  • Comparative adhesive performance

02

Test Method B – Loop Tack Tester Method

This method uses a dedicated ループタックテスター and is the most direct approach for routine adhesive evaluation. It requires a 5-inch specimen strip, which is specifically optimized for loop formation stability.

について Loop Tack Tester LTT-01 from Cell Instruments is designed primarily for Method B, ensuring:

  • Standard-compliant loop formation
  • Stable contact pressure control
  • High repeatability in ループタックテスト
  • Fast testing cycles for QC environments

Method B is widely preferred in production quality control because it improves consistency and reduces operator variability.

Application of Loop Tack Testing

ASTM D6195 is widely applied across industries involving pressure-sensitive adhesives:

  • Packaging tapes and sealing films
  • Self-adhesive labels and stickers
  • Medical tapes and wound dressings
  • Automotive adhesive components
  • Industrial bonding materials
  • Consumer adhesive products

In all these applications, tack strength determines how quickly and reliably the product can bond upon application.

粘着力試験

Importance of Tack Strength in Adhesive Performance

Understanding tack strength is essential because it directly influences:

  • Initial adhesion performance
  • Ease of application
  • Production line efficiency
  • End-user experience
  • Product reliability in real use conditions

Unlike peel or shear tests, ループタックテスト focuses on immediate bonding behavior, making it a unique and essential part of adhesive test methods.

Cell Instruments Loop Tack Tester LTT-01

について Cell Instruments LTT-01 Loop Tack Tester is specifically designed for ASTM D6195 Method B loop tack testing, providing a dedicated solution for pressure-sensitive adhesive evaluation.

Key advantages include:

  • Optimized for Method B specimen geometry (5-inch strips)
  • Stable and repeatable loop formation system
  • Accurate measurement of tack strength
  • High efficiency for routine QC testing
  • Compliance with ASTM D6195 standard requirements

This makes the LTT-01 particularly suitable for manufacturers requiring consistent and efficient adhesive performance evaluation in production environments.

ASTM D6195 Loop Tack Testing for Adhesive Tack Strength

よくある質問

What is ASTM D6195 used for?

ASTM D6195 is used to measure the tack strength of pressure-sensitive adhesives using ループタックテスト. It evaluates how strongly an adhesive bonds immediately upon contact with a standardized surface.

Method A uses a tensile tester with a 7-inch specimen strip, while Method B uses a dedicated loop tack tester with a 5-inch strip. Method B is more commonly used for routine quality control due to its simplicity and higher repeatability.

ループタックテスト measures the instant bonding performance of adhesives. It is essential for applications like tapes, labels, and packaging where immediate adhesion is required without pressure or curing time.

The method is suitable for pressure-sensitive adhesives used in tapes, labels, films, medical adhesives, and industrial bonding products. It is widely applied in adhesive test methods for quality control and R&D.

Tack strength represents the initial adhesion force when an adhesive first contacts a surface. It reflects how quickly and effectively an adhesive can form a bond under minimal pressure.

jaJA
en_USEN arAR bg_BGBG cs_CZCS da_DKDA de_DEDE elEL es_ESES etET fiFI fr_FRFR hu_HUHU id_IDID it_ITIT ko_KRKO lt_LTLT lvLV nb_NONB nl_NLNL pl_PLPL pt_PTPT ro_RORO ru_RURU sk_SKSK sl_SISL sv_SESV tr_TRTR ukUK jaJA